Civil Engineering Case Study - 1295 Words

Introduction The paper is aimed at identifying the definition of sustainability and studying several general principles relevant to civil engineering. A case study of the regeneration of Mossley Mill in Northern Ireland which covers the rebuilding and reuse technology will be given below for detailed research. This kind of technology is not only a typical solution which meets the concept of sustainability, but also a classical paradigm in the civil engineering area. It is further suggested that the case contains several principles which are the specific branches of the general principles. Also, as a contemporary development, the use and re-use of building and land related to the building are of significant meaning in maintaining†¦show more content†¦They have both defined sustainability in a more †engineering† way which might not be easy for ordinary people to understand. The main point they wanted to convey is that sustainability is changeable. Sustainability is not a rigid idea, it transforms from time to time along with the change in era and technology. To be sustainable, simply saving resources or even abandoning the usage of certain energy or raw materials helps a little. Since sustainability is a dynamic idea, solutions in different subjects should also be varied, and to some kind of degree, it is our engineers’ responsibility to build an ecosystem in a sustainable way. Developing new energy, using resources in a more efficient way and even changing the traditional transport can be all the concept that engineers should considerate about. It also satisfies the opinion that Thiele( 2016) has recently put in his book. He considers that to be sustainable does not mean people just have to survive in the long term, on the contrary, they should expand the idea and find more way in development, not simply in practicing situation and institution. It is argued that sustainability in the education to civil engineers is of vital meaning. Fenner and his colleagues(2014) argue that engineers should have the ability to respond to issues about the bad influence of the environment which has been done by human activities. The key factor is the growing up requirements fromShow MoreRelatedVinsun, An Indian Civil Engineering Company Case Study1427 Words   |  6 PagesIntroduction With the significantly increasing demand of electrical and civil services of the country resulting from the urbanization of India, VINSUN, an Indian civil engineering company, has expanded rapidly to meet market demand. Due to the growth of the company, VINSUN has experienced problems, such as information overloading and lack of accessibility to data when needed; VINSUN needs a data management system to manage their business information. The existing information management system isRead MoreCivil Engineering : An Interdisciplinary Field Essay1176 Words   |  5 PagesName Institution Course Instructor Date Civil Engineering Career My understanding of Civil Engineering and how it has evolved throughout the semester Civil engineering is an interdisciplinary field that deals in the design, construction and maintenance of the natural and physically built environment (Wong p.213). It entails the constructions works for roads, canals, dams, bridges, buildings and other forms of man-made infrastructure. Civil works are executed to improve the living standards ofRead MoreEssay on Civil Engineering at a Glance1408 Words   |  6 PagesThe career of a civil engineer is diminishing rapidly; however, more buildings and roads are being constructed. Becoming an engineer is not an easy task to complete. Many years of college and post-education training are required to gain the ability to be titled an engineer, especially a civil engineer. Civil engineers draft and design large construction projects including roads, building, airports, water shed lakes, dams, bridges and other various public works systems. Sometimes, civil engineers areRead MoreHistory Of Civil Engineering And Development Of Sanitary Enginee ring1117 Words   |  5 PagesName Institution Course: Instructor Date of Submission History of Civil Engineering 1. Hiram F. Mills (1836 - 1921) Hiram Mills is considered to have pioneered the development of sanitary engineering (Calvo 1). During his time, he served as one of the chief engineers who made improvements in water quality by employing a broad array of water engineering concepts ranging from filtration to treatment. On the river banks of Merrimack, Mills succeed in developing the first slow-sand filtration systemRead MoreWhat Is A Civil Engineer?1500 Words   |  6 PagesWhat is a civil engineer? I chose this topic because I don’t really know that much about this profession and I thought it would be interesting to learn more about it. Civil engineers design, build, supervise, operate, and maintain construction projects and systems in the public and private sector. Some of these things include roads, buildings, airports, tunnels, dams, bridges and systems for water supply and sewage treatments. As a civil engineer, you could help build a school that could withstandRead MoreEthics And Its Impact On Society, Ecosystem, And Wellbeing Of People And Environments1488 Words   |  6 PagesUsually the individuals from the civil engineering profession are blamed for a mixture of occasions that have adverse consequences for society, ecosystem, and wellbeing of people and environments. Most civil engineering codes of ethics worldwide exhort engineers to consciously place the general public interest specially others. So as to meet difficulties of the times, engineers must outfit themselves with both moral obligations and attention to the legal ramifications for the choices made throughoutRead MoreHistory of Engineering1060 Words   |  5 PagesEngineering has dated back to a time long ago. The concept of engineering has been present since ancient times. People have been making fundamental inventions The pulley, lever, and and wheel, although simple ideas, have a modern definition of engineering. Engineers in the Ancient Era were mainly used for building and supervising the pyramid constructions. Different civilizations used engineering in different ways. Ancient Greece made machines in both public and military fields. ArchimedesRead MoreImportance of Cad in Civil Engineering1397 Words   |  6 Pages Importance of Computer Aided Drafting in Civil Engineering Eric Belile Delaware Technical Community College Composition, English 121 Ms. Cynthia Mack 7/17/13 Importance of Computer Aided Drafting in Civil Engineering Throughout the last few years, technology has been improving the lives of people from all walks of life and all fields of study. One of the big pieces of technology in the civil engineering field today is computer aided drafting. AutoCAD is a computerRead MoreThe Growth of Civil Engineering1179 Words   |  5 Pages Civil engineering is a modern day career that deals with the design, construction, and maintenance of public structures. Civil engineering helps the public to have a more efficient life. It mainly deals with the roads, bridges, buildings and waterways which the public uses. One who wants to pursue a career in civil engineering should know why civil engineers are needed, what civil engineers do, and how to become a successful engineer. Civil engineering is a broad term which coversRead MoreEvaluation Essay : Architectural Engineering1240 Words   |  5 PagesArchitectural Engineering As a high schooler, I’ve been told repeatedly to find a career and stick to stick it. I’ve been pushed to figure out my life with very little to work off of. All I was given were interest tests and orders to use my hobbies as a base. Obviously, I didn’t get very far with so little to work with and was always expecting the answer to just come to me. I suppose I have lucked out a bit and it did in a way. Thanks to my dad bouncing ideas with me, I started looking at civil engineering

Contract Option For Eo Executive Compensation What Is It...

ISSUE: Issue #1: Initial contract exception for EO executive compensation – what is it generally, and what are the parameters? Issue #2: How does 990 Schedule J define â€Å"key employee?† Issue #3: What are the 33 principles of good governance listed by the independent section? Issue #4: Summarize General Information Letter 2002-21. CONCLUSION: Issue #1: The initial contract exception provides an exception from the excise tax imposes upon excess benefit transactions between disqualified persons and a tax-exempt organizations. Issue #2: A â€Å"key employee† is general someone who has certain responsibilities and receives over $150,000 in compensation from the organization and any related organization. (See below for complete explanation) Issue†¦show more content†¦Ã¢â‚¬ ¢ â€Å"disqualified person† – any person in a position to exercise substantial influence over the affairs of the organization in the past five years, any family member of a disqualified person, and any entity controlled (35% or more voting power) by a disqualified person. The â€Å"Initial Contract Exception† provides that the excise tax does not apply to fixed payment made by an organization to a disqualified person pursuant to an initial contract. †¢ â€Å"initial contract† – a binding written contract between the organization and a person who was not a disqualified person immediately before entering the contract. o This does not apply if the contract can be terminated or cancelled by the organization without the disqualified person’s consent and there is no substantial penalty to the organization for the cancellation. o If a material change is made to the initial contract it will be treated as a new contract. †¢ â€Å"fixed payment† - an amount of cash or other property specified in the contract, or determined by a fixed formula specified in the contract, that is paid or transferred in exchange for the provision of specified services or property. †¢ This exception does not apply in a year unless the disqualified person substantially performs his or her obligations under the contract. Issue #2 – â€Å"key employee† definition To be considered a key employee, under Form 990, all the following four test/conditions must be met: (1) Employee is

Operations Management Supply Chain and Inventory

Question: Discuss about the Operations Management for Supply Chain and Inventory. Answer: The management of the inventory and purchasing in any organization is considered as the most tedious and time consuming task. The centralized approach among the firms and the coordinated aspects to exchange the views are considered on the highest priority. Similarly, Brisbane also holds the suitable inventory and the purchasing system in the well-defined manner. The Brisbane Outdoor Power location mainly operates from three main locations with the different holding authorities. The owner and the CEO of the organization was Donald Saxon. The three retail outlets are mentioned in three different years. In the year 1985, Mt.Gravatt centre (owned by Donald Saxon), Stratphine center in the year 2001 (owned by Belinda Green) and the Ipswich in the year 2004 (owned by Adam Conte). Being the CEO and major authority of the organization, Donald Saxon provides the authority for all the members to manage the major aspects related to the organization in the organized manner. In managing the operational aspects, Donald Saxon adapted the Laissez fair technique of the leadership in which he provides the individual rights of the owners to manage the aspects related to the purchasing and inventory. Though the support and the coordination among the organization is maintained by exchanging the views and supplying the products required but, the management aspects of managing all the three centers are totally different from each other. In short, the operational aspects (i.e. purchasing and management of the inventory) are not coordinated in the stable and well-defined manner. Apart from this, the other issue related to the purchasing and inventory management is also highlighted when Ms. Green takes over all the three subsidiaries of the Brisbane. She came up with the conclusion that no appropriate set of policies and procedures are followed by the CEO to manage the operational aspects and all things are going in vein by following the inappropriate system in the organization. In fact, the products related to the major brands are also available in the distorted manner. Some branches possess the other products and some holds the other type of varieties (Dominick, 2016). The execution of the process totally depends upon the trust and the satisfaction level of the customers. There is no integrated system identified for the development of the system in the organization and there is also a lack of concentration, introspection and coordination in the organization observed (Engel, 2011). In short, the inventory and purchasing system is not appropriate and all the aspects are unconnected with each other due to which the coordination is also lacking between all of them. Comparative Advantages and Disadvantages It is defined in the case study that the CEO of the organization doesnt follow any specific type of leadership processes in managing all the retail outlets of the Brisbane. This will directly create some positive and some negative impact on the existing process. In fact, the process itself shows some advantages and disadvantages while completing the actual scenario. In the case study, the CEO of the company is quite simple and doesnt follow any rules or the procedures to get success in the retail industry. This free nature and the different perspective of the CEO lead the company to both the negative and positive perspectives. As a professional consultant, the advantage which is identified in the organization with respect to the operational management are defined below: - The approaches from different individual regarding the management of the organization makes the organization stronger and the owners of the individual organization gets the opportunity to interchange their views in a separate manner. Due to three outlets of organization in Australia, the reputation of the organization and product also increases in front of the customers. All the three retail outlets are also capable providing the knowledgeable staff, high quality merchandise and the appropriate services to the customers. Apart from this, the stores are also operated in the autonomous manner, due to which the profit chances may also increase and the transfer of the products from one location to the other can be done in an easier manner (Aksoy Erenguc, 1988). Some of the disadvantages related to the process are also defined below in a suitable manner: - The SCM is not defined in the suitable manner due to which the product is losing its value in the international market (Hamlett, 2015). The inventory managers of all the stocks have their different approach related to the purchasing. Due to which, the exchange of purchasing process is not being managed in an appropriate manner. There are various issues related to the sustainability and the existence of the current system rising in the organization. By following all these advantages and disadvantages in the appropriate manner, the suitable aspects related to the inventory and purchasing can be identified appropriately. Supply Chain and Inventory Management Concept The concept of supply chain management is changeable all the time and the appropriate aspects are required for the process of improvement. There are various theories and forecasting approaches that are identified in the supply chain and inventory management concept by which the improvement of the existing process in the organization can be done on the large scale (Gonzalez-Loureiro Dabic, 2015). To manage the inventory, the suitable aspects related to the inventory control should be managed in the appropriate way so that, further aspects related to the inventory management can be improved in the progressive manner simultaneously. Firstly, the theories related to the inventory management are defined below which may help in increasing the efficiency and the financial aspects can also get improved with the help of these models (Ziukov, 2015). The models are categorized into two major types which are named as the One Item Model and Multi Item Models. The sub sections of these models are also found out which are defined with the help of the diagram and on the basis of the diagram, further explanation is defined on the individual level (Bottani, 2016). The One Item Models are considered as the innovative models which are further divided into the deterministic and stochastic type of model. The deterministic model is also divided into classical lot size, wagner within model and heuristic model. The Stochastic models have been divided to newsboy problem, the arrow harris marschak problem and hadley within the model. In this model, the stochastic model shows the indeterminate aspects related to the inventory and the purchasing aspect. But, the determinate or deterministic model will be helpful in improving the major aspects related to the appropriate and determinant constraint appropriately (Hadley Whitin, 2007). By the help of this model, the ideas to manage the efficiency of an existing system can be increased on the wide level. To maintain the adequate stock levels and to reduce the financial aspects related to the purchasing and inventory management in the organization, the most suitable model is the Multi Item model which is helpful in strengthening the financial aspects of the organization on the wide level. The sub models which are included in the Multi Item Model are the Flaccidities and the Multi Item Inventory Models which are helpful in providing the suitable strength to the financial aspects of the organization. The dixon model and the classical lot size model will be helpful in defining the suitable aspects related to the organization in all the possible ways (Mukharji, Israelit, Faelli, 2011). Apart from this, the forecasting and the prediction of the future aspects may be helpful in managing the financial aspects and the investment also reduces by using the forecasting model (Hyndman, 2016). The identification of the suitable forecasting model is defined below in an appropriate manner: - (Dobrzykowski Leuschner, 2015) In the defined scenario, while there is the requirement of suitable changes in the organization, the methods of forecasting will be helpful in solving the tedious situation in a well-organized way. By the forecasting methods, the future demands can be identified easily and can try to be solved out in the appropriate manner. By this, the inventory can also be managed in the appropriate manner and the control on the forecasting can easily be done in the right way (Zizler, 2007). Apart from this, the organization, i.e. Brisbane can also focus towards the other perspectives to increase the efficiency and reduce investment. The other aspects are the appropriate control and watch in the inventory management, controlling the excessive aspects related to the organization and the other processes is also controlled with the help of the stable process (McMann, 2011). Recommendations The restructuring of the existing structure is considered as a tedious task. The framing of the new structure is quite easy to form rather than changing the existing structure. For restructuring the inventory and the purchasing system in the organization, various aspects should also be taken into consideration (Addo-Tenkorang Helo, 2011). The major steps in the restructuring are defined below: - A suitable implementation of the supply chain management in the organization will be helpful in implementing the major growth aspects of the organization. In SCM, the suitable growth and strategic aspects are defined which are helpful in maintaining the sequence of the process. Due to the introduction of the SCM, the suitable products, services, finance and the appropriate information system can be developed. In the SCM process, the mapping, data gathering and categorization, analysis and validation, solution design and appropriate implementation plan can be introduced (Singla, 2008). The second phase is identified as the restructuring of policies and the procedures which are already followed in the organization. The suitable policies which can be introduced in the organization are making of the suitable inventory system in the organization, formation of the appropriate purchasing policies, forecasting, management of the orders and setting of the stable requirement by which the appropriate aspects related to the organization can be solved (Florence, 2014). Formation of the centralized system in managing the data in an appropriate way will be helpful in providing the assistance to the efficiency saving and the financial aspects of the organization. The solution to reduce investment and the requirement related to the space is identified. The appropriate performance level and the usage of the SCM level are helpful in providing the ERP packaging system on an appropriate level (Urabe Tezuka, 2014). By following this three step process, it becomes easier to reconstruct the existing structure of the organization. Action Plan To solve the major issues and problems related to the organization, the suitable action plan will be developed which will further help in improving the aspects related to the organization and the inventory purchasing management aspects related to it. There are various steps defined in the action plan defined below: - Step 1: The major cause and reason for the issues related to the inventory and purchasing management needs to be identified. Step 2: The suitable strategy or planning for the restructuring of the existing structure can also be done, by which the modification can be prepared (Tan Platts, 2005). Step 3: The appropriate ideas and the brainstorming aspects may also be generated with the help of the stable process. Step 4: The best solution for the appropriate modification are selected. Step 5: Finally, the suitable evaluation of process is done, which is helpful in providing the appropriate results and feedback (Schell, 1991). By using this action plan, the appropriate results can be generated easily. References Bottani, E. (2016). Supply Chain and Inventory Management. International Journal of Supply Chain and Inventory Management. Retrieved from https://www.inderscience.com/jhome.php?jcode=ijscim Addo-Tenkorang, R., Helo, P. (2011, October). Enterprise Resource Planning (ERP): A Review Literature Report. Journal Proceedings of the World Congress on Engineering and Computer Science, 2, 1-9. Retrieved from https://www.iaeng.org/publication/WCECS2011/WCECS2011_pp1126-1134.pdf Aksoy, Y., Erenguc, S. (1988). Multià ¢Ã¢â€š ¬Ã‚ Item Inventory Models with Coà ¢Ã¢â€š ¬Ã‚ ordinated Replenishments: A Survey. International Journal of Operations Production Management, 8(1), 63 - 73. Retrieved from https://www.emeraldinsight.com/doi/abs/10.1108/eb054814 Bottani, E. (2016). Supply Chain and Inventory Management. International Journal of Supply Chain and Inventory Management. Retrieved from https://www.inderscience.com/jhome.php?jcode=ijscim Dobrzykowski, D., Leuschner, R. (2015, October 01). Examining Absorptive Capacity in Supply Chains: Linking Responsive Strategy and Firm Performance. Journal of supply chain management, 51(4), 3-28. Retrieved from https://onlinelibrary.wiley.com/doi/10.1111/jscm.12085/full Dominick, C. (2016). Purchasing Inventory Management Hook Up! Purchasing Inventory Management Hook Up! Retrieved from https://www.nextlevelpurchasing.com/articles/purchasing-and-inventory-management.php Engel, B. (2011, March). 10 best practices you should be doing now. 10 best practices you should be doing now. Retrieved from https://www.supplychainquarterly.com/topics/Procurement/scq201101bestpractices/ Florence, N. (2014, June 03). How to Write an Action Plan to Achieve Success and Productivity. How to Write an Action Plan to Achieve Success and Productivity. Retrieved from https://blog.udemy.com/how-to-write-an-action-plan/ Gonzalez-Loureiro, M., Dabic, M. (2015). Supply chain management as the key to a firms strategy in the global marketplace: Trends and research agenda. International Journal of Physical Distribution Logistics Management, 45(1/2), 159 - 181. Retrieved from https://www.emeraldinsight.com/doi/abs/10.1108/IJPDLM-05-2013-0124?journalCode=ijpdlm Hadley, G., Whitin, T. (2007). A review of alternative approaches to inventory theory. RAND Corporation. Retrieved from https://www.rand.org/content/dam/rand/pubs/research_memoranda/2007/RM4185.pdf Hamlett, K. (2015). The Advantages of Inventory Control. The Advantages of Inventory Control. Retrieved from https://smallbusiness.chron.com/advantages-inventory-control-2228.html Hyndman, R. (2016). Forecasting. International Journal of Forecasting, 32(4), 1103-1402. Retrieved from https://www.journals.elsevier.com/international-journal-of-forecasting/ McMann, G. (2011, July). Supply Chain Restructuring: Considerations for Change. The journal of healthcare, 1(1). Retrieved from https://www.jhconline.com/supply-chain-restructuring-considerations-for-change.html Mukharji, P., Israelit, S., Faelli, F. (2011, July 06). Ten ways to improve inventory management. Ten ways to improve inventory management. Retrieved from https://www.bain.com/publications/articles/ten-ways-to-improve-your-inventory-management-wsj.aspx Schell, C. (1991). Leadership Organization Development . Leadership Organization Development Journal, 12(1), 28 - 32. Retrieved from https://www.emeraldinsight.com/doi/abs/10.1108/01437739110139434 Singla, A. (2008). Impact of ERP systems on small and mid sized public centre enterprises. Journal of Theoretical and Applied Information Technology , 4(2), 1-13. Retrieved from https://www.jatit.org/volumes/research-papers/Vol4No2/Enterprise%20Resource%20Planning%20(ERP),%20ERP%20impact,%20ERP%20Design%20and%20Implementation,.pdf Tan, K., Platts, K. (2005). Business Process Management. Business Process Management Journal, 11(2), 137 - 157. Retrieved from https://www.emeraldinsight.com/doi/abs/10.1108/14637150510591147 Urabe, S., Tezuka, M. (2014). Best Practice for Inventory Optimization based on a Restructuring of the Organization, its Functions, and its Information Systems. IIEOM. Retrieved from https://iieom.org/ieom2014/pdfs/369.pdf Ziukov, S. (2015). A literature review on models of inventory management under uncertainty. Yurii Fedkovych Chernivtsi National University. Retrieved from https://www.mruni.eu/upload/iblock/019/VSE-15-5-1-03.pdf Zizler, M. (2007). Introduction Theory of Inventory Control. University of Regensburg. Retrieved from https://www.uni-regensburg.de/Fakultaeten/nat_Fak_II/forschung/morgenstern/Skript4.pdf

Religious Thought in World Perspective First Traditions free essay sample

A discussion on the way in which primal religions began and their belief structures were formed. The following paper discusses how primal religions are often misunderstood as history is often passed down orally due to no existence of written records. This paper examines how the written texts of the Bible, Torah, and Quran, over time, created a more literate society and helped to broaden the scope and area these religions now influence. The paper continues to discuss how religions today are followed, even into the Internet. When studying the Primal religions, it is imperative to remember that there was no written log of their beliefs. Their rights and rituals were passed down from generation to generation. Those selected within the population as the holy one; or mediator who could interact with the god or gods were the ones to pass down the oral traditions. As anyone today knows, if youve ever played the game ;telephone the message can be distorted as it is passed from person to person. We will write a custom essay sample on Religious Thought in World Perspective: First Traditions or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page The histories we have to read today are only the last version of the original story. Perhaps many were not corrupted and we are hearing the same that was told eons ago; but there is the possibility that what we are reading is far from the original.